TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 1 Download
Page 304 of 890
TM 9-2320-280-20-1 REFERENCE INFORMATION ALTERNATOR Change 2 2-219 FUSIBLE LINK REPLACEMENT 1. Disconnect battery ground cable. 2. Remove boot from alternator output terminal. 3. Remove nut, lockwasher, washers, and fusible link from terminal. 4. Inspect fusible link. 5. Replace fusible link if damaged or appears burned. 6. Connect battery ground cable. NOTE Wire 6 connects alternator output stud to starter terminal. A poor connection at these points will cause a low or no alternator output condition.