TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 1 Download
Page 120 of 890
Change 2 2-29 TM 9-2320-280-20-1 BIENNIALLY (12,000 MILE) PMCS PARTS LIST ITEM NO. PART NUMBER NSN NOMENCLATURE QTY 1. MS51943-31 5305-00-061-4650 Locknut 1 2. 271172 5310-00-152-0598 Assembled Locknut 4 3. MS21245-L10 5310-00-449-2381 Locknut 4 4. MS35756-8 5315-00-616-5526 Woodruff Key 1 5. MS24665-355 5315-00-012-0123 Cotter Pin 1 6. MS51943-43 5310-00-061-4651 Locknut 1 7. MS51943-35 5310-00-935-9021 Locknut 1 8. MS51943-39 5310-00-488-3889 Locknut 4 9. MS51967-18 5310-00-763-8919 Locknut 2 10. MS35338-45 5310-00-407-9566 Lockwasher 2 11. PH13 2940-00-082-6034 Filter, Fluid, Engine Oil 1 12. 12337210 4330-01-121-6350 Parts Kit, Fluid, Transmission (3L80) 1 13. 8655625 5330-01-148-7492 Gasket (3L80) 1 14. 8684221 2520-01-398-4589 Parts Kit, Fluid, Transmission (4L80-E) 1 (1995, 1996) 15. 8677743 5330-01-360-5271 Gasket (4L80-E) 1 16. 12354864 4330-01-438-3813 Parts Kit, Fluid, Transmission (4L80-E) 1 (1997, 1998) LUBRICATION TABLE EXPECTED USAGE FLUID/LUBRICANT CAPACITIES TEMPERATURE Engine Oil OE/HDO 30 Crankcase: Above +15°F (-9°C) OE/HDO 10 w/o filter 7 qt (6.6 L) 40° to -15°F (4° to -26°C) OEA w/filter 8 qt (7.6 L) 40° to -65°F (4° to -54°C) Dry System 10 qt (9.5 L) (INC. oil cooler) Engine Ethylene Glycol Radiator: 5 qt (4.7 L) Coolant and Water Complete System: 26 qt (24.6 L) 1/4 Ethylene Glycol/ 15°F (-9°C) and above 3/4 Water 2/5 Ethylene Glycol/ 40° to -15°F (4° to -26°C) 3/5 Water 3/5 Ethylene Glycol/ 40° to -65°F (4° to -54°C) 2/5 Water Brake System Master Cylinder: (All except Fluid Silicone BFS 0.69 pt (0.33 L) All Temperatures M1097, “A1”, “A2” Complete System: series and M1123) 1.2 pt (0.56 L) (M1097, “A1”, “A2” Master Cylinder: series and M1123) 1.12 pt (0.53 L) Complete System: 1.63 pt (0.78 L) OE/HDO 15/40 (Grade 15W-40) lubricant may be used when expected temperatures are above +5°F (-15°C). If OEA lubricant is required to meet the temperature ranges prescribed in the table, then the OEA lubricant is to be used in place of OE/HDO 10 lubricant for all temperature ranges. If operating conditions are severe or abnormal, service chassis lubrication points at 1,000 miles (1,600 kilometers).