TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 1 Download
Page 102 of 890
Table 2-1. Unit Level Preventive Maintenance Checks and Services HMMWV (Cont'd) ITEM NO. INTERVAL ITEM TO BE INSPECTED PROCEDURES 10 Semi- Suspension d. Inspect control arms, control arm d. Control arm bent, Annual and Steering bushings, springs, shock absorbers, bushing worn or obvious System and bracket for damage. damage that would (Cont'd) hinder operation. e. Inspect steering column U-joints, e. U-joints, tie rods, tie rods or radius rods, pitman arm, pitman arm or idler arm center link, and idler arm for breaks, are worn or cracked. cracks, and wear. e.1. Inspect steering column for e.1. Steering column security of mounting hardware. is not secure. f. Inspect steering gear for mounting f. Any mounting bolt security. Tighten mounting bolts to missing or unserviceable. 60 lb-ft (81 N • m). TM 9-2320-280-20-1 Change 1 2-11 NOT FULLY MISSION CAPABLE IF: NOTE Do not lubricate shock absorber bushings, radius rod bushings, stabilizer bar bushing, or suspension arm pivot bushing.