TM-9-2320-280-10 HMMWV Operator Manual Download

TM 9-2320-280-10 USAGE FLUID/LUBRICANT CAPACITIES Engine Oil OE/HDO 30 Crankcase: Above + 15° F (-9° C) (MIL-L-2104) OE/HDO 10 w/o filter +40° to -15° F (+4° to -26° C) (MIL-L-46167) OEA 7 qt (6.6 L) +40° to -65° F (+4° to -54° C) w/ filter 8 qt (7.6 L) Dry System 10 qt (9.5 L) Engine Ethylene Glycol Radiator: Coolant and Water 5 qt (4.7 L) Complete 1/4 Ethylene Glycol, System: 26 qt Above +15° F (-9°C) 3/4 Water (24.6 L) 2/5 Ethylene Glycol, +40° to -15° F (+4° to -26° C) 3/5 Water 3/5 Ethylene Glycol, +40° to -65° F (+4° to -54° C) 2/5 Water Transmission Dexron ® II or Dry 11 qt All Temperatures (3L80) Dexron ® III (10.4 L) (except arctic) Drain & Refill 6 qt (5.7 L) (4L80-E) Dexron ® III Dry 13.5 qt All Temperatures (12.8 L) (except arctic) Drain & Refill 7.7 qt (7.3 L) OEA Arctic Temperatures Steering Dexron ® II or 1 qt (0.95 L) All Temperatures System Dexron ® III w/Cooler 1.25 qt (1.18 L) Upper Ball Joints (all vehicles), Lower Ball Joints ( A2 and M1123 vehicles only), Tie Rod Ends, GAA As Required All Temperatures Pitman Arm, Propeller Shafts, etc. Hinges, Cables, and Linkages OE/HDO As Required All Temperatures EXPECTED TEMPERATURES OE/HDO 15/40 (Grade 15W-40) lubricant may be used when expected temperatures are above +5°F (–15°C). If OEA lubricant is required to meet the temperature ranges prescribed in the Lubrication Table, then the OEA lubricant is to be used in place of OE/HDO 10 lubricant for all temperature ranges. If operating conditions are severe or abnormal, service chassis lubrication points at 1,000 mi (1,609 km). Table G-1. Lubrication Change 1 G-3