TM-9-2320-280-10 HMMWV Operator Manual Download
Page 312 of 405
TM 9-2320-280-10 3-32 Change 1 NOTE • Prior to mirror adjustment, move mirror arm assembly until assembly locks in place. • Illustration shows left side adjustment assembly; right side is basically the same. • The left mirror has been lowered 5 in. (12.7 cm) on M996A2, M997A2, M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, and M1123 vehicles to improve visibility. a. Left Mirror (Driver’s Side). Loosen top nut (5) and position mirror arm (7) forward of windshield frame (4) so that center line of mirror arm (7) is approximately 9-1/2 in. (24.1 cm) from vehicle (1). Tighten top nut (5). Adjust mirror head (6) for maximum visibility. b. Right Mirror (Passenger’s Side). Loosen top nut (5) and position mirror arm (3) forward of windshield frame (4) so that center line of mirror arm (3) is approximately 7-3/4 in. (19.7 cm) from vehicle (1). Tighten top nut (5). Adjust mirror head (2) for maximum visibility. 3-25. REARVIEW MIRROR ADJUSTMENT (FOR VEHICLE SERIAL NUMBER 100,000 AND ABOVE)