TM-9-2320-280-10 HMMWV Operator Manual Download
Page 298 of 405
TM 9-2320-280-10 3-20 Change 1 c. Air Filter Element Cleaning. CAUTION Do not strike ends of filter element on hard surface, or damage to filter element may result. (1) Hold filter element (1) so open end faces ground. (2) Gently tap completely around filter element (1) with hand to free trapped dirt. d. Filter Element Installation. (1) Remove clamp (2) and cover (3) from air cleaner assembly (5). (2) Position filter element (1) into air cleaner assembly (5) and secure element (1) to stud (6) with nut and washer assembly (4). CAUTION When clamp is secured to end of air cleaner ensure the clamp bolt is between the three and six o’clock positions to prevent damaging hood when hood is closed. NOTE Perform step 4 for vehicles with new over-center clamp configuration only. (3) Install cover (3) on end of air cleaner assembly (5) and position clamp (2) as shown. Tighten clamp bolt (7). (4) Install cover (3) on air cleaner assembly (5) and secure with over-center clamp (2). (5) Lower and secure hood (para. 3-8).