TM-9-2320-280-10 HMMWV Operator Manual Download
Page 226 of 405
Change 1 2-167 CAUTION The static rated working load of the tiedown ring assembly is 500 lb (227 kg) applied along the centerline of the assembly. Side-loading the tiedown ring assembly will cause damage to the tiedown and/or cause the tiedown bolt to become loose. Either of these conditions will result in an unrestrained load causing damage to vehicle and/or equipment. The load must be applied as shown below. If tiedown rings (9) loosen, position tiedown ring (9) in direction of load and tighten bolt (8). Notify unit maintenance to tighten bolt (8) to 65 lb-ft (88 N•m) when practical. 2-45. CARGO TIEDOWN OPERATION 2-44. TROOP SEAT KIT OPERATION a. General. The troop seat kit is used to convert M998, M998A1, M1097, M1097A1, M1097A2, and M1123 cargo vehicles into troop carriers. b. Lowering Troop Seat. (1) Remove two lockpins (7) from troop seat (6). (2) Lower troop seat (6). (3) Install two lockpins (7) to secure troop seat (6). c. Raising Troop Seat. (1) Remove two lockpins (7) from troop seat (6). (2) Raise troop seat (6) and secure with two lockpins (7). TM 9-2320-280-10