TM-9-2320-280-10 HMMWV Operator Manual Download
Page 225 of 405
2-166 Change 1 WARNING Do not operate the vehicle without the windshield assembly posi- tioned upright and the “B’’ pillar securely attached. Operation of the vehicle without these structures in place may result in injury to personnel and damage to equipment. NOTE Before lowering windshield on vehicles equipped with retention bracket, the windshield retention bracket must be removed. Refer to unit maintenance. a. Lowering Windshield Assembly. (1) Remove two hitch pins (3) from inside hinge pins (4) and remove hinge pins (4). (2) Lower windshield assembly (5) to hood and secure to four footman loops (2) with two straps (1). b. Raising Windshield Assembly. (1) Remove straps (1) from footman loops (2) securing windshield assembly (5) to hood. (2) Raise windshield assembly (5). (3) Secure windshield assembly (5) with two inside hinge pins (4) and hitch pins (3). 2-42. GENERAL a. This section provides operating instructions for components found on M998, M998A1, M1038, and M1038A1 cargo/troop carriers and M1037 and M1042 S250 shelter carriers. b. Refer to para. 2-2a for stowage location of fire extinguisher on cargo/troop carriers and S250 shelter carriers. Refer to para. 2-27 for operation of fire extinguisher. 2-43. WINDSHIELD ASSEMBLY OPERATION Section V. CARGO/TROOP CARRIER AND S250 SHELTER CARRIER OPERATION TM 9-2320-280-10