TM-9-2320-280-10 HMMWV Operator Manual Download
Page 132 of 405
TM 9-2320-280-10 Change 1 2-83 Item No. Interval Cr ewmember Procedure Not Fully Mission Capable If: Table 2-2. Preventive Maintenance Checks and Services (Cont’d) Location Item to Check/ Service DRIVER 32 After Right NOTE Front, If leakage is detected, Side further investigation is Exterior needed to determine the location and cause of the leak. a. Visually check underneath a. Any brake fluid vehicle for evidence of fluid leak; class III leak of leakage. oil, fuel, or coolant. b. Visually check halfshaft cv boots and ball joint boots for presence of rips, tears, cuts. c. Inspect frame crossmem- c. Crossmembers or bers and underbody support underbody support for missing hardware, cracks, are missing any bends, and breaks. Notify unit hardware, broken, maintenance if rust is present cracked, or if a bent but the base metal is sound. or rusted-through condition is present that would affect vehicle operation. d. Visually check front and d. Any damage that right side of vehicle for obvi- will prevent opera- ous damage that would im- tion. pair operation. DRIVER 33 After Engine Oil CAUTION • Do not permit dirt, dust, or grit to enter engine oil dipstick tube. Internal engine damage will result if engine oil becomes contaminated. • Do not overfill engine crankcase. Damage to engine will result.