TM-10-5411-231-13&P HMMWV Cargo Bed Cover Operator, Unit and Direct Support Download
Page 61 of 128
TM 10-5411-231-13&P CARGO BED COVER (CBC) HMMWV, TYPE I 0015 00 ACCESS PLATE THIS WORK PACKAGE COVERS: Remove, Replace INITIAL SETUP: Maintenance Level Materials/Parts Unit Screws 10-24, .88 lg; Washers, Tools and Special Tools Flat No. 10; Washers, Lock No. 10; Screwdriver, Philips #2 Nuts 10-24; Screw 6-32, .25 lg; Wrench, 3/8” Socket Access Plate P/N AP40W; Cable Boot P/N 18-4055; Lanyard P/N MS25083-2CC28; Sealing Compound P/N 700145 GENERAL This procedure contains information and instructions to keep CBC access plate assemblies in good working order by removing and replacing damaged parts. REMOVAL 1. Using Philips screwdriver and wrench (see WP 2300 00, Table 0023 00-2, Item 1), remove screw, nut and washer (1) holding lanyard (2) to the inside of CBC shell, by loosening nut from inside. 2. Turn access plate (5) counter-clockwise and remove. 3. Using Philips screwdriver and wrench, remove additional five screws, nuts and washers (3) from inside CBC on cable boot (4), by loosening nuts from inside. Two personnel are required. Remove cable boot. 4. Remove other end of lanyard from access plate by removing screw. 0015 00-1