TM-10-5411-231-13&P HMMWV Cargo Bed Cover Operator, Unit and Direct Support Download
Page 55 of 128
TM 10-5411-231-13&P CARGO BED COVER (CBC) HMMWV, TYPE I 0012 00 DOOR HOLDER THIS WORK PACKAGE COVERS: Remove, Replace INITIAL SETUP: Maintenance Level Materials/Parts Unit Screws 10-24; Tools and Special Tools Washers, Flat No. 10; Screwdriver, Philips #2 Nut, Self-Lock 10-24; Wrench, 3/8” Socket Door Holder P/N 104054; Drill with 1/8” Bit Spring Clip P/N 1723A1; Sealing Compound P/N 700145 GENERAL This procedure contains information and instructions to keep CBC door holder assemblies in good working order by removing and replacing damaged parts, or the entire door holder assembly. REMOVAL 1. Using Philips screwdriver and socket wrench (see WP 0023 00, Table 0023 00-2, Item 1), loosen nuts (1) on inside corner of CBC with socket wrench. Remove four screws, washers and nuts from door holder on outside corner of CBC. Remove door holder. 2. Using Philips screwdriver and socket wrench (see WP 0023 00, Table 0023 00-2, Item 1), loosen nuts from inner side of door, with socket wrench. Remove four screws, washers and nuts (2) from door holder bracket (3) on upper door. This requires 2 personnel. Remove door holder bracket. 3. Using drill (see WP 0023 00, Table 0023 00-2, Item 3), drill out one pop rivet (4) and remove spring clip (5). 0012 00-1