TM-10-5411-205-13 HMMWV S-250/G Shelter Operator, Unit and Direct Support Download
Page 70 of 127
TM 10-5411-205-13 3-26. Louver Cover Assembly Latches. This task covers: a. Inspect b. Replace INITIAL SETUP Tools Materials/Parts General Mechanic’s Automotive Tool Kit Sealer (Item 28, Appendix D) a. Inspect. (Figure 3-28) (1) Inspect latch (3) for wear or damage. (2) Inspect stud plate assembly (5) for damage and secure mounting. (3) Check for loose or missing hardware. b. Replace. (Figure 3-28) (1) (2) (3) (4) (5) (6) Remove and retain a nut (1), flat washer (2), latch (3), and flat washer (4) from stud plate assembly (5). Remove and retain two flat head screws (6) attaching stud plate assembly (5) to inner door panel (7) and remove the stud plate (5) and spacer (8). Inspect condition of rivnuts (9) and replace if necessary (paragraph 3-9.b). Position spacer (8) and stud plate assembly (5) in place, dip the two mounting screws (6) in sealer, and secure stud plate (5) and spacer (8) to inner door panel (7). Slide flat washer (4), latch (3), and flat washer (2) onto stud and secure with nut (1). Apply a continuous bead of sealer around spacer (8). 3-53