Sign up to sell your inventory with NSN Lookup

TM-10-5411-205-13 HMMWV S-250/G Shelter Operator, Unit and Direct Support Download

Page 61 of 127

TM 10-5411-205-13 3-21. Hinge Assembly (cont). e . Install. (1) Apply a coat of conductive compound on mounting side of laminated shim (5) and position shim (5) and hinge assembly (4) in place over mounting holes. (2) Using three hex head screws (3) and flat washers (2) from the outside of door panel, secure with three flat washers (2) and nuts (1) from inside of panel. (3) Apply a continuous bead of sealer around edge of hinge leaf (8) and laminated shim (5) and around head of hex head screws (3). Figure 3-23. Hinge Assembly Replacement. 3-44