TM-10-5411-205-13 HMMWV S-250/G Shelter Operator, Unit and Direct Support Download
Page 54 of 127
TM 10-5411-205-13 3-19. Door Handle Assembly and Latching Mechanism. This task covers: a. Inspect b. Service c. Disassemble d. Assemble e. Repair INITIAL SETUP Tools Materials/Parts General Mechanic’s Automotive Tool Kit Sealer (Item 28, Appendix D) Solid Film Lubricant (Item 22, Appendix D) Conductive Compound (Item 33, Appendix D) NOTE Except for the length of the latch assembly rods (items 4 and 5, Figure 3-21), the inner identical. Maintenance a. Inspect. (1) Inspect the door latch door and outer procedures are door handle mechanisms are the same for both. assembly for secure mounting and broken or worn parts. (2) Inspect for ease of operation. (3) Inspect the door handle for tightness and for worn or damaged parts. b. Service. (Figure 3-21) Service of the door latch assembly door handle (8) and latch arm assemblies (10) with lubricant. c. Disassemble. (Figure 3-21) (1) (2) (3) NOTE consists of lubricating the Disassembly procedures are similar for top and bottom sections of door latch assembly. Punch out spring pin (1) and remove flat washer (2). Pull pin (3) and push latch rod assemblies (4 and 5) to the side. Punch out spring pin (6) attaching the inside handle (7) to outside handle and shaft (8). Remove inside handle (7). 3-37