TM-10-5411-205-13 HMMWV S-250/G Shelter Operator, Unit and Direct Support Download
Page 44 of 127
TM 10-5411-205-13 3-14. Recessed Step Pan Assembly. This task covers: Replace INITIAL SETUP Tools Materials/Parts General Mechanic’s Automotive Tool Kit Conductive Compound (Item 33, Appendix D) Sealer (Item 28, Appendix D) Replace. (Figure 3-15) (1) Pull step (1) out and down to operating position. (2) Remove two attaching locknuts (2) and remove step (1). (3) Remove and retain ten phillips head screws (3) and lock washers (4) attaching recessed step pan (5) to shelter wall and remove pan. (4) If rivnuts (6) are damaged, remove and replace. (Refer to paragraph 3-9. b.) (5) Apply conductive compound to shelter wall where it will mate with flange of . (6) position recessed step pan (5) in place on. shelter wall and secure with ten phillips head screws (3) and lock washers (4). (7) Position step (1) in place over mounting studs in recessed pan (5) and secure with two locknuts. (8) Apply a continuous bead of sealer around edge of recessed step pan (5). 3-27