TM-10-5411-205-13 HMMWV S-250/G Shelter Operator, Unit and Direct Support Download
Page 42 of 127
TM 10-5411-205-13 3-12. Trough This task covers Replace INITIAL SETUP TOOlS Materials/Parts General Mechanic’s Automotive Tool Kit Sealer (Item 28, Appendix D) Replace. (1) (2) (3) (4) (5) (Figure 3-13) NOTE The trough mounted to the shelter rear panel just above the door is identical to the trough on the outer door except that the rear panel trough is longer and is mounted with six screws instead of five. Remove five tapping screws (1) mounting trough (2) to outer door (3). Take trough (2) off door (3). Apply sealer to back of trough (2). Position trough (2) on top edge of outer door (3). Dip in sealer and install five tapping screws (1), and coat heads of screws with sealer. Figure 3-13. Trough Replacement. 3-25