TM-10-5411-205-13 HMMWV S-250/G Shelter Operator, Unit and Direct Support Download
Page 21 of 127
TM 10-5411-205-13 3-5. Service Upon Receipt of Materiel (cont). (6) Remove lifting ring from lifting hook and Remove sling hooks from lifting eyes and separate lifting ring from sling hooks. remove ropes from rear towing eyes. c. Securing Shelter on 1-1/4-Ton (M561) Truck. (Figure 3-2) (1) Install plate and eye bolt assemblies on cargo bed siderails of truck as described in TM 9-2320-242. (2) Hook ends of four sling assemblies to tiedown eyes at each top corner of shel- ter, using hooks at furthest end of cables from turnbuckles. Figure 3-2. Securing Shelter on Truck. (3) Hook sling hooks at opposite end of cables to appropriate. eye bolts on truck. Make sure sling hooks point away from shelter. (4) Tighten all turnbuckles evenly by hand. Then turn each turnbuckle an addi- tional one-half turn with a bar or rod inserted in turnbuckle slot. CAUTION Do not overtighten turnbuckles. Overtightening may tear lifting and tiedown eyes from shelter or damage eye assembly or shelter. 3-4