TB-9-2510-251-24 HMMWV Installation, Removal and Parts for Add-On-Armor (AOA) Download
Page 20 of 212
1-10 TB 9-2510-251-24 1-4. B-PILLAR ARMOR INSTALLATION (2 AND 4 DOOR) TOOLS: General mechanics tool kit: (NSN 5180-00-177-7033) MATERIAL/PARTS: FIGURE ITEM PART NO. NOMENCLATURE QTY 1-5 1 6430701-01M1 TAPPING STRIP, B-PILLAR HINGE 2 2 6430716-01M1 COVER STRIP, HINGE-FRONT 2 3 4397005-014 WASHER, FLAT, 0.375 IN. 2 4 4397000-058 CAPSCREW, HEX HEAD, 0.375-16 X 0.75 IN. 2 5 6430684-01M1 B-PILLAR ARMOR 2 6 4397050-049 UPSET FASTENER, AVK-SHORT, 0.375-16 X 0.75 IN. 2 a. Installation 1) Install B-pillar armor as follows (see figure 1-5). a. Position B-pillar cover strip (2) onto lower B-pillar aligning with two 3/8-drill bits in upper holes. Clamp B-pillar cover strip (2) in place. b. Match drill seven 13/64-inch holes in lower B-pillar using B-pillar cover strip (2) as a guide. Remove clamp and drill bits and retain B-pillar cover strip (2). c. Clean out drill shavings from behind hat section in B-pillar (see figure 1-5 for cleanout location). d. Insert B-pillar tapping strip (1) per figure 2-5. e. Install upper B-pillar (TM 9-2320-280-20-3, para. 10-67). f. Install upset fastener (6) in upper B-pillar. g. Install B-pillar armor (5) securing with capscrew (4) and washer (3). Do not tighten capscrew (4) h. Repeat steps a. through g. for opposite side of vehicle.