TB-9-2510-251-24 HMMWV Installation, Removal and Parts for Add-On-Armor (AOA) Download
Page 95 of 212
TB 9-2510-251-24 2-23 3) Remove B-partition assemblies as follows (see figure 2-20): a. Remove four capscrews (3), washers (4) and locking nuts (5) securing right and left B-partition assemblies (10 and 2), upper gap strip (11) and lower gap strip (6) to right and left B-partition mount brackets. Discard locking nuts (5). b. Remove 12 capscrews (1), washers (7) and locking nuts (8) disassembling upper gap strip (11) and lower gap strip (6) from right and left B-partition assemblies (10 and 2). Discard locking nuts (8). c. Peal up B-partition rubber strip (9) from vehicle tunnel. Discard used rubber strip. LEFT B-PARTITION MOUNT BRACKET (REF) RIGHT B-PARTITION MOUNT BRACKET (REF) B-PILLAR (REF) 1 2 3 4 5 6 1 3 7 8 7 8 4 5 9 11 10 VEHICLE TUNNEL (REF) Figure 2-20. B-Partition Removal (2 Door Only)