TB-9-2510-251-24 HMMWV Installation, Removal and Parts for Add-On-Armor (AOA) Download
Page 89 of 212
TB 9-2510-251-24 2-17 3. Remove Upper C-partition as follows (see figure 2-14). a. Remove two capscrews (11), six washers (12), and two locknuts (13). Discard locknuts (13). Repeat step on opposite of vehicle. b. Remove eight capscrews (9), washers (14) and two mount bracket isolators (7). Repeat step on opposite of vehicle c. Remove eight capscrews (4) and locknuts (5). Remove upper C-partition gap strip (3). d. Remove six capscrews (15) and locknuts (16). Remove lower C-partition gap strip (6). e. Remove left C-partition (1) from vehicle. Remove right C-partition (2) from vehicle. 4 15 2 1 16 6 3 5 VEHICLE TUNNEL (REF) 7 12 12 13 9 7 LEFT REAR WHEEL HOUSE (REF) C-PARTITION SUPPORT MOUNT (REF) 11 12 7 14 Figure 2-14. Upper C-Partition Removal (4 Door Only)