TB-9-2510-251-24 HMMWV Installation, Removal and Parts for Add-On-Armor (AOA) Download
Page 54 of 212
TB 9-2510-251-24 1-44 1-11. ANTENNA MOUNT INSTALLATION (4 DOOR ONLY) TOOLS: General mechanics tool kit: (NSN 5180-00-177-7033) MATERIAL/PARTS: FIGURE ITEM PART NO. NOMENCLATURE QTY 1-22 1 6430655-01M1 BRACKET, REAR ANTENNA, RIGHT EXTERIOR 2 2 4397064-005 NUT, LOCKING, 0.375-16 8 3 4397005-014 WASHER, FLAT, 0.375 IN. 8 4 6430656-01M1 BRACKET, REAR ANTENNA 2 5 4397000-060 CAPSCREW, HEX HEAD, 0.375-16 X 1.00 IN. 4 6 4397005-010 WASHER, FLAT, 0.250 IN. 16 7 4397000-006 CAPSCREW, HEX HEAD, 0.250-20 X 0.75 IN. 8 8 4397000-060 CAPSCREW, HEX HEAD, 0.375-16 X 1.00 IN. 8 9 4397005-014 WASHER, FLAT, 0.375 IN. 16 10 4397064-005 NUT, LOCKING, 0.375-16 8 11 4397064-001 NUT, LOCKING, 0.250-20 8 12 6430654-01M1 BRACE, ANTENNA BRACKETS 2 a. Installation 1) Install antenna mount (see figure 1-22). a. Install interior antenna mount bracket (4) and exterior antenna mount bracket (1) on C-partition support mount with four capscrews (8), eight washers (9), and four locknuts (10). Torque locknuts (10) to 37 lb ft (50 N•m). b. Install center support brace (12) on interior antenna mount bracket (4) and exterior antenna mount bracket (1) with four capscrews (7), eight washers (6), and four locknuts (11). Torque locknuts (11) to 10 lb ft (14 N•m). c. Secure interior antenna mount bracket (4) to exterior antenna mount bracket (1) with two capscrews (5), four washers (3), and two locknuts (2). Torque locknuts (2) to 37 lb ft (50 N•m). d. Repeat steps a. through c. for opposite side of vehicle.