TB-9-2510-251-24 HMMWV Installation, Removal and Parts for Add-On-Armor (AOA) Download
Page 51 of 212
TB 9-2510-251-24 1-41 5) Install B-partition center bracket as follows (see figure 1-20). a. Position B-partition center bracket (3) aligning with bottom holes of lower B-partition gap strip and transfer two hole locations to vehicle tunnel as shown in figure 1-20. b. Drill two 13/32-inch holes into vehicle tunnel and install two upset fasteners (2). c. Apply fasting compound to two capscrews (7). d. Install B-partition center bracket (3) onto vehicle tunnel securing with two capscrews (7) and washers (6). Torque two capscrews (7) to 23 lb ft (31 N•m). e. Secure B-partition center bracket (3) onto lower B-partition gap strip with two capscrews (1), washers (4) and locking nuts (5). Torque two capscrews (1) to 37 lb ft (50 N•m). 1 VEHICLE TUNNEL (REF) TRANSFER TWO HOLE LOCATIONS LOWER B-PARTITION GAP STRIP (REF) LEFT B-PARTITION ASSEMBLY (REF) RIGHT B-PARTITION ASSEMBLY (REF) 2 3 4 5 6 7 Figure 1-20. B-Partition Center Mount Bracket Installation (2 Door Only)