TB-9-2510-251-24 HMMWV Installation, Removal and Parts for Add-On-Armor (AOA) Download
Page 36 of 212
TB 9-2510-251-24 1-26 2) Install C-partition support mounts as follows (see figure 1-12). a. Locate C-partition support mount (1) on vehicle rear wheel house as shown in figure 1-12. b. Match drill four (two on each side of support mount) 9/32 inch holes through C-partition support mount (1) and vehicle rear wheel house. c. Grind rivets flushed on inside of rear wheel house, as required, to ensure a flush fit of nuts (4). d. Install eight capscrews (2), washers (3), and locknuts (4) to secure C-partition support mount (1). Torque capscrews (2) to 10 lb ft (14 N•m). e. Repeat a. through d. on opposite side of vehicle.