TB-9-2510-251-24 HMMWV Installation, Removal and Parts for Add-On-Armor (AOA) Download
Page 157 of 212
TB 9-2510-251-24 7. Tighten all remaining bolts. NOTE Some models will use 5/16” – 20 and 5 ½” bolts to accommodate the roll bar. 8. Place front striker into existing holes on the B-Pillar. Insert 5/16” – 20 and 1 ½” bolts and 5/16” washers through striker plate and B-Pillar and loosely tighten 5/16” locking nuts. Adjust striker to door latch as needed. Tighten down mounting hardware. 4-5