TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 3 of 624
TB 9-2510-251-13 WARNING SUMMARY • Solvent used to clean parts is potentially dangerous to personnel and property. Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes. Wear goggles and rubber gloves to protect eyes and skin. Wash exposed skin thoroughly. Do not smoke or use near open flame or excessive heat. Failure to observe this warning could result in severe injury or death to personnel. • Do not attempt to perform any maintenance tasks on the kit while the vehicle is operating. Serious injury or death could result from failure to observe this warning. • Keep hands and arms away from fan blade and drive while engine is running. Failure to do so may result in serious injury to personnel. • When adjustment or service requires a running engine, two personnel will be used (one at controls and one at service point). This helps prevent accidental movement of controls. Failure to comply could result in serious injury to personnel and/or damage to equipment. • When checking connections, do not let tools touch battery box. A direct short, arcing tool, heating to red hot, and battery explosion could result. Failure to do so may result in serious injury or death to personnel. • Use rags or a brush to lubricate components. Sharp edges can cut hands. Failure to comply could result in injury to personnel. • Let hot parts cool before starting work. Hot parts can burn personnel. Failure to comply could result in injury to personnel. • All personnel should be familiar with and heed all safety warnings in the Warning Summary, page a, prior to performing any installation, removal, or maintenance for the Air Conditioning (A/C) Kit. Failure to comply could result in injury or death to personnel and/or damage to equipment. • Prior to beginning any work on the A/C Kit: 1. Disconnect batteries 2. Apply parking brake 3. Chock wheels 4. Remove rings, bracelets, watches, necklaces, and any other jewelry. Failure to comply could result in injury or death to personnel and/or damage to equipment. • When drilling through floor, use caution not to damage or drill into the fuel tank. Failure to comply could cause damage to equipment and/or injury to personnel. a a/(b blank)