Sign up to sell your inventory with NSN Lookup

TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download

Page 95 of 624

2-79 TB 9-2510-251-13 15 14 8 16 9 13 2-1.3 Installation of Air Conditioning Kit to M1025 and M1025A1 with GSIE Add-on-Armor (Cont’d). a. Install Compressor (Cont’d) WARNING Solvent used to clean parts is potentially dangerous to personnel and property. Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes. Wear goggles and rubber gloves to protect eyes and skin. Wash exposed skin thoroughly. DO NOT smoke or use near open flame or excessive heat. Failure to observe this warning could result in severe injury or death to personnel. Figure 2-116. Compressor Adjusting Arm (8) Clean mounting surface where mounting bracket mounts to engine with solvent (item 10, Appendix D). (9) Lower mounting bracket (9) and compressor (8) onto mounting location in front left side of engine. (10) Position compressor adjusting arm (13) on compressor (8) and secure with bolt (14), washer (15), and locknut (16). Tighten bolt (14) to 18 ft-lbs. Do not overtighten.