TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download

Page 74 of 624

2-58 TB 9-2510-251-13 (30) Position hose guard (40) in recessed channel of bed behind condenser hose hole. (31) Using hose guard (40) as a template, drill 1/4 inch diameter hole in bed. (32) From underneath vehicle, insert bolt (41) and washer (42) through hose guard (40) and bed. (33) Secure with locknut (43). 39 2-1.2 Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d). b. Install Evaporator and Condenser (Cont’d) Figure 2-90. Condenser Hose Hole (Two-Door) Figure 2-91. Hose Guard (29) Two-door vehicles only: a. Drill a 1.25 inch diameter hole (39) for condenser hose in transmission tunnel, near driver side vertical condenser mount angle. b. De-burr hole. 43 41 42 40