Covering the politics, Business and technology of defense - Subscribe Today

TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download

Page 73 of 624

2-57 TB 9 -2510-251-13 (28) Four-door vehicles only: a. Drill a 1.25 inch diameter hole (38) for condenser hose in bed floor between wheel well and driver side vertical condenser mount angle, forward of rear curtain hook. b. De-burr hole. 38 32 33 32 35 34 36 37 32 2-1.2 Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d). b. Install Evaporator and Condenser (Cont’d) Figure 2-88. Evaporator Side Brackets Figure 2-89. Condenser Hose Hole (Four-Door) (24) Remove two top center bolts from rear center armor plate and rear side armor plate. (25) Loosely attach evaporator side brackets (32) to evaporator unit with original hardware. (26) Position condenser mount angles over top slots in rear center armor plate. (27) Install bolts (33) flat washers (34), and oversize washers (35) through evaporator side brackets (32), armor plates, rear curtain, and condenser mount angles, and secure with flat washers (36) and locknuts (37). Tighten snug.