TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 71 of 624
2-55 TB 9 -2510-251-13 2-1.2 Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d). b. Install Evaporator and Condenser (Cont’d) 23 23 23 22 Figure 2-83. Install Evaporator Unit (21) Insert four new bolts (24), flat washers (25), and oversize washers (26) through lower evaporator support bracket, armor plates, rear curtain and condenser mount angle. Install flat washers (27) and locknuts (28) and tighten snug. 28 27 25 26 24 Figure 2-84. Lower Support Bracket 23 (17) Remove two lower center 1/2 inch bolts from rear center armor plate and rear side armor plates. (18) Hang evaporator unit (20) from inside top of armor plate (above holes drilled in transmission tunnel). (19) Adjust evaporator unit (20) to align slots in lower support bracket (22) with slots in center armor plate. (20) Tighten evaporator unit top clamp bracket bolts (23).