TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 60 of 624
2-44 TB 9-2510-251-13 (25) Install new AC/power steering belt as shown. WARNING Solvent used to clean parts is potentially dangerous to personnel and property. Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes. Wear goggles and rubber gloves to protect eyes and skin. Wash exposed skin thoroughly. DO NOT smoke or use near open flame or excessive heat. Failure to observe this warning could result in severe injury or death to personnel. 40 42 39 41 43 AIR CONDITIONER COMPRESSOR NEW IDLER PULLEY ALTERNATOR POWER STEERING CRANKSHAFT TENSIONER PULLEY EXISTING IDLER PULLEY WATER PUMP 2-1.2 Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d). a. Install Compressor (Cont’d). Figure 2-62. AC/Power Steering Belt Figure 2-63. Adjusting Arm Installation (26) Clean mounting surface where adjusting arm mounts to water pump housing with solvent (item 10, Appendix D). (27) Secure adjusting arm (38) to water pump housing with bolt (39), lockwasher (40), washer (41), and washer (42). (28) Adjust tension on belt (43). Rotate compressor outboard until proper belt tension is reached. 38