TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 31 of 624
2-15 TB 9-2510-251-13 28 27 25 26 24 Figure 2-19. Lower Support Bracket Installation 2-1.1 Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1 with GSIE Add-on-Armor (Cont’d). b. Install Evaporator and Condenser (Cont’d) (21) Insert four new bolts (24), flat washers (25), and oversize washers (26) through lower evaporator support bracket, armor plates, rear curtain and condenser mount angle. Install flat washers (27) and locknuts (28) and tighten snug. NOTE For correct installation of compressor mount angles, bar in bottom of rear curtain should be below compressor mount angles and not between angles and armor plate. COMPRESSOR MOUNT ANGLE CURTAIN BAR Figure 2-20. Condensor Mount Angle