TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 30 of 624
2-14 TB 9-2510-251-13 2-1.1 Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1 with GSIE Add-on-Armor (Cont’d). b. Install Evaporator and Condenser (Cont’d) Figure 2-17. Upper Clamp Brackets (Two-Door) Figure 2-18. Install Evaporator Unit 21 19 20 23 23 23 23 22 (16) Two-door vehicles only: a. Remove and discard two upper support brackets from evaporator unit. Set aside bolts for future use. b. Loosely attach upper clamp brackets (19) to evaporator unit (20) with four bolts (21). (17) Remove two lower center 1/2 inch bolts from rear center armor plate and rear side armor plates. (18) Hang evaporator unit (20) from inside top of armor plate (above holes drilled in transmission tunnel). (19) Adjust evaporator unit (20) to align slots in lower support bracket (22) with slots in center armor plate. (20) Tighten evaporator unit top clamp bracket bolts (23). 20