Covering the politics, Business and technology of defense - Subscribe Today

TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download

Page 25 of 624

2-9 TB 9-2510-251-13 24 26 22 23 25 27 2-1.1 Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1 with GSIE Add-on-Armor (Cont’d). a. Install Compressor (Cont’d) WARNING Solvent used to clean parts is potentially dangerous to personnel and property. Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes. Wear goggles and rubber gloves to protect eyes and skin. Wash exposed skin thoroughly. DO NOT smoke or use near open flame or excessive heat. Failure to observe this warning could result in severe injury or death to personnel. Figure 2-8. Adjusting Arm Installation (19) Clean mounting surface where adjusting arm mounts to water pump housing with solvent (item 10, Appendix D). (20) Secure adjusting arm (22) to water pump housing with bolt (23), lockwasher (24), washer (25), and washer (26). (21) Adjust tension on belt (27). Rotate compressor outboard until proper belt tension is reached.