TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 23 of 624
2-7 TB 9-2510-251-13 15 14 8 16 2-1.1 Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1 with GSIE Add-on-Armor (Cont’d). a. Install Compressor (Cont’d) WARNING Solvent used to clean parts is potentially dangerous to personnel and property. Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes. Wear goggles and rubber gloves to protect eyes and skin. Wash exposed skin thoroughly. DO NOT smoke or use near open flame or excessive heat. Failure to observe this warning could result in severe injury or death to personnel. 9 13 Figure 2-5. Compressor Adjusting Arm (8) Clean mounting surface where mounting bracket mounts to engine with solvent (item 10, Appendix D). (9) Lower mounting bracket (9) and compressor (8) onto mounting location in front left side of engine. (10) Position compressor adjusting arm (13) on compressor (8) and secure with screw (14), washer (15), and locknut (16). Tighten bolt to 18 ft-lbs. Do not overtighten.