TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 127 of 624
2-111 TB 9-2510-251-13 HIDDEN 2-1.4 Installation of Air Conditioning Kit to M1025A2 with GSIE Add-on-Armor (Cont’d). a. Install Compressor (Cont’d) WARNING Solvent used to clean parts is potentially dangerous to personnel and property. Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes. Wear goggles and rubber gloves to protect eyes and skin. Wash exposed skin thoroughly. DO NOT smoke or use near open flame or excessive heat. Failure to observe this warning could result in severe injury or death to personnel. NOTE To achieve good electrical ground, make sure no paint is present under ground cables, in threaded hole, or on mounting surface. (18) Clean mounting surface where mounting bracket mounts to engine with solvent (item 10, Appendix D). (19) Lower mounting bracket (25) and compressor onto mounting location in front left side of engine. (20) Secure ground cables (26) to mounting bracket (25) with original bolt (27) and washers (28). 24 23 Figure 2-167. Clamp and Fuel Vent Line Figure 2-168. Mounting Bracket and Ground Cables 25 27 26 28 (16) Loosen clamp (23) attaching fuel vent line (24) to valve cover stud. (17) Bend fuel vent line slightly rearward to clear compressor mount bracket.