TB-9-2510-251-13 HMMWV Operator and Field Maintenance, Installation & Parts Add-On-Armor Air Conditioning Download
Page 104 of 624
2-88 TB 9-2510-251-13 (29) Install six screws (39) to top edge of condenser assembly. 39 39 38 38 38 38 37 36 38 37 2-1.3 Installation of Air Conditioning Kit to M1025 and M1025A1 with GSIE Add-on-Armor (Cont’d). b. Install Evaporator and Condenser (Cont’d). CAUTION When handling condenser assembly, avoid damaging fins on underside of condenser. Failure to comply could result in damage to equipment. Figure 2-132. Air Deflector Plate Figure 2-133. Condenser Assembly (26) Cut two ties on lower edge of air deflector plate (36). (27) Remove four screws (37) from electrical EMI filter panel and air deflector plate (36). Set hardware aside for future use. (28) Remove twelve screws (38) and wire harness clamps (if applicable) from air deflector plate (36) and condenser assembly. Discard air deflector plate (36).