TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 98 of 680
TB 9-2320-335-13&P 3-16 3-26. FUEL TANK SUPPLY AND RETURN LINES REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: WARNING Diesel fuel is highly flammable. Do not perform this procedure near fire, flames, or sparks. Severe injury or death may result. CAUTION Cover or plug all open hoses and connections immediately after disconnection to prevent contamination. Remove all plugs prior to connection. NOTE Have drainage container ready to catch fuel. 1. Loosen four clamps (7) and disconnect hoses (6) from fuel tank return and supply lines (8). 2. Remove two locknuts (1), capscrews (5), washers (4), clamps (3), and return and supply lines (8) from front body bracket (2) and rear body bracket (10). Discard locknuts (1). 3. Remove three clips (9) from fuel supply and return lines (8). 1. Install return and supply lines (8) on front body bracket (2) and rear body bracket (10) with two clamps (3), washers (4), capscrews (5), and locknuts (1). 2. Connect supply and return lines (8) to four hoses (6) and tighten clamps (7). 3. Secure fuel supply and return lines (8) together with three clips (9). b. Installation a. Removal Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix A, Item 77) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Engine right splash shield removed (para. 10-24.1). General Safety Instructions Do not perform this procedure near fire, flames, or sparks. Maintenance Level Unit