TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 90 of 680
TM 9-2320-335-13&P 3-8 3-25. FUEL TANK AND SHIELD MAINTENANCE (Cont’d) 5. Remove two nuts (15), washers (14), and capscrews (7) from fuel tank support straps (6) and (12) and remove lower straps (13). 6. Loosen two clamps (3) and disconnect fuel supply hoses (1) and (2) from fuel return line (4) and supply line (5). NOTE Perform step 7 if vehicle is equipped with vehicular heater. 7. Loosen clamp (17) and disconnect fuel supply hose (18) from vehicular heater fuel supply line (16). 8. Disconnect vent line (20) from tee (19). 9. Remove capscrew (22) and clamp (23) securing vent line (20) to body (24). 10. Remove nut (8), washer (9), capscrew (10), and rear strap (12) from strap bracket (11). 11. Lower fuel tank (21) for access to vent line (29) and clamp (28). 12. Disconnect vent line (20) from fitting (25) on fuel tank (21). 13. Remove locknut (26), washer (27), and clamp (28) from vent line (29) and fuel tank (21). Discard locknut (26). 14. Remove vent line (29) from vent line housing (30). NOTE Prior to removal, tag leads for installation. 15. Disconnect jumper leads 58J (33) and 28B (35) from body wiring harness (34). 16. Bend clamp (32) down and remove jumper harness (31). 17. Remove fuel tank (21) from vehicle.