TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 398 of 680
24-14. REAR-FRONT TIEDOWN BRACKET REPLACEMENT This task covers: a. Removal b. Installation 1. Remove four locknuts (1), washers (2), capscrews (7), and washers (2) from tiedown bracket (3) and frame rail (10). Discard locknuts (1). 2. Remove two locknuts (8), washers (4), capscrews (5), washers (4), vent tube mounting bracket (6), and tiedown bracket (3) from rear suspension front crossmember mounting bracket (9). Discard locknuts (8). 1. Install tiedown bracket (3) on frame rail (10) with four washers (2), capscrews (7), washers (2), and locknuts (1). Tighten locknuts (1) to 260 lb-ft (353 N•m). 2. Install tiedown bracket (3) and vent tube mounting bracket (6) on rear suspension front crossmember mounting bracket (9) with two washers (4), capscrews (5), washers (4), and locknuts (8). Tighten locknuts (8) to 90 lb-ft (122 N•m). b. Installation a. Removal TB 9-2320-335-13&P 24-14 INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Four locknuts (Appendix A, Item 88) Two locknuts (Appendix A, Item 85) (Serial numbers 299999 and below) Two locknuts (Appendix A, Item 114.4) (Serial numbers 300000 and above) Manual References TM 9-2320-387-24P Equipment Condition Wheel removed (TM 9-2320-387-24-1). Maintenance Level Direct support