TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 392 of 680
24-9. RIGHT ENGINE MOUNT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: NOTE Tag engine mounts for installation. The left and right engine mounts are not interchangeable with each other. 1. Remove two locknuts (10), washers (1), capscrews (2), and washers (1) from support bracket (8) and engine mount bracket (5). discard locknuts (10). 2. Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5). 3. Remove three locknuts (9), washers (7), capscrews (6), washers (7), support bracket (8), and engine mount bracket (5) from frame rail (11). Discard locknuts (9). 1. Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (7), capscrews (6), washers (7), and locknuts (9). 2. Secure support bracket (8) on engine mount bracket (5) with two washers (1), capscrews (2), washers (1), and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-ft (122 N•m). 3. Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3). b. Installation a. Removal TB 9-2320-335-13&P 24-8 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Five locknuts (Serial numbers 299999 and below) (Appendix A, Item 85) Five locknuts (Serial numbers 300000 and above) (Appendix A, Item 114.4) Manual References TM 9-2320-387-24P Equipment Condition Engine right mount and insulator removed (para. 15-3). Maintenance Level Direct support