TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 387 of 680
24-3 24-4. SPLASH SHIELD SUPPORT BRACKET REPLACEMENT This task covers: a. Removal b. Installation 1. Remove locknut (1), washer (2), capscrew (4), washer (2), and splash shield (3) from bracket (7). Discard locknut (1). 2. Remove two locknuts (5), washers (6), capscrews (9), washers (6), and bracket (7) from frame rail (8). Discard locknuts (5). 1. Install bracket (7) on frame rail (8) with two washers (6), capscrews (9), washers (6), and lock- nuts (5). Tighten locknuts (5) to 90 lb-ft (122 N•m). 2. Install splash shield (3) on bracket (7) with washer (2), capscrew (4), washer (2), and locknut (1). Tighten capscrew (4) to 15 lb-ft (20 N•m). b. Installation a. Removal FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10). TB 9-2320-335-13&P INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Three locknuts (Serial numbers 299999 and below) (Appendix A, Item 85) Three locknuts (Serial numbers 300000 and above) (Appendix A, Item 114.4) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-10). Maintenance Level Direct support