TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 302 of 680
TB 9-2320-335-13&P 15-6 NOTE Left and right engine mounts are not interchangeable with each other. 1. Install engine mount (2) and insulator (9) on engine (3) with three lockwashers (4) and capscrews (5). Using 9/16-in. torque adapter, tighten capscrews (5) to 30-40 lb-ft (41-54 N•m). 2. Using crowfoot and adapter, tighten nut (11) to 24 lb-ft (33 N•m) on starter support bracket (1) and starter (10). 3. Lower engine (3) until insulator (9) is aligned and resting on engine mount bracket (6). Install two washers (8) and locknuts (7) on insulator (9) and engine mount bracket (6). Using 3/4-in. torque adapter, tighten locknuts (7) to 90 lb-ft (122 N•m). 4. Remove pin (12) from sling bracket (14) and engine lifting sling. 5. Remove two capscrews (13) and sling bracket (14) from left cylinder head (15). 6. Remove two capscrews (17) and engine lift sling from right cylinder head (16). 7. Install two radiator supports (19) on airlift brackets (21) with four capscrews (20), washers (22), and locknuts (18). Tighten capscrews (20) to 37 lb-ft (50 N•m). d. Installation 2 1 3 4 5 6 7 8 9 11 10 ~ 2 15-3. ENGINE MOUNT AND INSULATOR MAINTENANCE (Cont'd)