TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 280 of 680
TB 9-2320-335-13&P 10-96. SPARE TIRE CARRIER REPLACEMENT 10-18 This task covers: a. Removal b. Installation 1. Remove pin (3) from locking block (2) and bumper lock (1). 2. Remove capscrew (16), lockwasher (15), washer (14), retainer washer (13), thrust bushing (12), tire carrier subassembly (4), and thrust bushing (8) from pivot mount (9). Discard lockwasher (15). 3. Remove four locknuts (5), washers (6), capscrews (11), washers (10), large washers (17) and (18), pivot mount (9), and mud flap (19) from bumper (7). Discard locknuts (5). 4. Remove two locknuts (24), washers (23), capscrews (20), washers (21), and bumper lock (22) from bumper (7). Discard locknuts (24). 1. Install bumper lock (22) on bumper (7) with two washers (21), capscrews (20), washers (23), and locknuts (24). Tighten locknuts (24) to 90 lb-ft (122 N•m). 2. Install mud flap (19) and pivot mount (9) on bumper (7) with four large washers (17) and (18), washers (10), capscrews (11), washers (6), and locknuts (5). Tighten locknuts (5) to 90 lb-ft (122 N•m). 3. Install tire carrier subassembly (4) on pivot mount (9) with thrust busing (8), thrust bushing (12), retainer washer (13), washer (14), lockwasher (15), and capscrew (16). Tighten capscrew (16) to 75 lb-ft (102 N•m). 4. Install pin (3) on locking block (2) and bumper lock (1). b. Installation a. Removal INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Lockwasher (Appendix A, Item 174) Six locknuts (Appendix A, Item 114.4) Manual References TB 9-2320-335-13&P, Appendix E Maintenance Level Unit