TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 278 of 680
TB 9-2320-335-13&P 10-16 10-75.3. HEATER FAN MOTOR RESISTOR ASSEMBLY (ELECTRONIC) REPLACEMENT This task covers: a. Removal b. Installation Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-10 TB 9-2320-335-13&P, Appendix E Equipment Condition Instrument cluster (electronic) removed (para. 4-14.1). Maintenance Level Unit INITIAL SETUP: 1. Remove four capscrews (17), washers (16), and instrument cluster (1) from instrument panel (2). 2. Remove two nuts (4) and (6) and resistor (8) from threaded studs (12) on instrument panel (2). NOTE Prior to removal, tag leads for installation. 3. Disconnect harness lead 399 (3) from harness lead 399A (11). 4. Disconnect harness lead 400 (5) from harness lead 400D (10). 5. Disconnect harness lead 400 (7) from harness lead 400A (9). 6. Remove nut (14), capscrew (15), and resistor plate (13) from instrument panel (2). 1. Install resistor plate (13) on instrument panel (2) with capscrew (15) and nut (14). 2. Connect harness lead 400 (7) to harness lead 400A (9). 3. Connect harness lead 400 (5) to harness lead 400D (10). 4. Connect harness lead 399 (3) to harness lead 399A (11). 5. Install resistor (8) on threaded studs (12) on instrument panel (2) with two nuts (4) and (6). 6. Install instrument cluster (1) on instrument panel (2) with four capscrews (17) and washers (16). b. Installation a. Removal