TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 224 of 680
8-4.1. RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE (24-STUD) (Cont’d) 9. Lay tire (1) flat. WARNING Do not use compressor strap if it is frayed or damaged. Ensure runflat is free of grease and runflat compressor strap is centered around runflat. Failure to do so may cause injury to personnel. NOTE Perform steps 10 and 11 when using runflat compressor P/N J39250. Perform steps 12 and 13 when using runflat compressor P/N 528236. 10. Position runflat compressor (3) on runflat (2) so that runflat compressor hex-drive (4) is facing up and strap (5) is centered around runflat (2). NOTE Compress runflat by rotating hex-drive in either direction. Rotate hex-drive the opposite direction to loosen. 11. Using runflat compressor (3), compress runflat (2). 12. Position runflat compressor (6) on outer edge of runflat (2) with handle assembly (7) facing up and strap (8) centered around runflat (2). NOTE Compress runflat by rotating handle assembly in a clockwise direction. Rotate handle assembly counterclockwise to loosen. 13. Using runflat compressor (6), compress runflat (2). NOTE • It may be necessary to use a tire spoon and tire soap to remove runflat from tire. • When using runflat compressor P/N 528236, handle may need to be removed before removing runflat. 14. Remove runflat (2) from tire (1) and remove runflat compressor (3) or (6) from runflat (2). TB 9-2320-335-13&P 8-4