TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 214 of 680
TB 9-2320-335-13&P 7-34 7-23. PARKING BRAKE CABLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-10 TM 9-2320-387-24-1 TB 9-2320-335-13&P, Appendix E Equipment Condition • Wheels chocked and parking brake released (TM 9-2320-387-10). • Access cover removed (para. 10-58.4). • Muffler and catalytic converter removed (TM 9-2320-387-24-1). • Rear propeller shaft removed (TM 9-2320-387-24-1). Maintenance Level Unit NOTE Replacement procedures for left and right side parking brake cables are basically the same. This procedure covers the left side. 1. Remove clevis pin (6), clevis bolt (2), washers (3) and (7), and clevis (1) from caliper lever (8). 2. Remove parking brake cable (4) from cable bracket (5). NOTE Use 1/2 in. line wrench for removing parking brake cable from caliper bracket. 3. Remove retaining ring (11) from parking brake cable (4). 4. Remove parking brake cable (4) from equalizer cable bar (9) and C-beam (10). 5. Pull parking brake cable (4) forward and remove from vehicle. 1. Install parking brake cable (4) over rear front crossmember (13) and muffler bracket (12). 2. Slide parking brake cable (4) through C-beam (10) and install on equalizer cable bar (9). 3. Secure parking brake cable (4) to C-beam (10) with retaining ring (11). 4. Install parking brake cable (4) on cable bracket (5). 5. Install clevis (1) on caliper lever (8) with washer (3), clevis bolt (2), washer (7), and clevis pin (6). b. Installation a. Removal