TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 173 of 680
TB 9-2320-335-13&P 6-9 6-7. HALFSHAFT MAINTENANCE (Cont’d) 1. Pack outer joint (8) with lithium grease. 2. Install outer boot (6) on shaft (7). Ensure boot (6) seats in groove of shaft (7). 3. Secure outer boot (6) on shaft (7) with clamp (4). 4. Install outer boot (6) on joint (8). Ensure boot (6) seats in groove of joint (8). 5. Secure outer boot (6) on joint (8) with clamp (5). 6. Clamp shaft (7) in soft-jawed vise. 7. Position clamps (3) and (2) on shaft (7). 8. Install inner boot (1) on shaft (7). Push boot (1) past groove on shaft (7). e. Assembly 1 2 3 4 5 6 7 8 NOTE When installing wear sleeve over halfshaft spline, ensure wear sleeve does not come into contact with splines. Using a pipe or like item (11.4), slide wear sleeve (11.3) over halfshaft spline (11.2) until flange (11.5) of wear sleeve (11.3) contacts shoulder adjacent to halfshaft seal surface (11.1). d. Wear Sleeve Installation 11.1 11.2 11.3 11.4 11.5 2.063 IN. (52.4 MM) I.D. 6.00 IN. (152.4 MM