TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 169 of 680
TB 9-2320-335-13&P 6-5 6-7. HALFSHAFT MAINTENANCE This task covers: a. Removal d. Wear Sleeve Installation b. Disassembly e. Assembly c. Cleaning and Inspection f. Installation 1. Remove access plug (8) and washer (7) from geared hub (4). 2. Remove halfshaft retaining capscrew (6) and lockwasher (5) from halfshaft (9) and geared hub (4). Discard lockwasher (5). 3. Remove six capscrews (3), two-piece lockwashers (2), and halfshaft (9) from rotor (1) and output flange (10). Discard two-piece lockwashers (2). NOTE Perform steps 4 and 5 for rear halfshafts only. 4. Remove cotter pin (15), washer (16), clevis pin (18), and parking brake clevis (17) from lever (14). Discard cotter pin (15). 5. Remove clip (13) and disconnect cable (11) from caliper cable bracket (12). Discard clip (13). a. Removal 8 7 6 5 4 9 10 1 2 3 12 13 14 15 16 17 11 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Boot service kit (Appendix A, Item 4) Clip (Appendix A, Item 11) Cotter pin (Appendix A, Item 19) Six two-piece lockwashers (Appendix A, Item 191) Lockwasher (Appendix A, Item 156) Drycleaning solvent (Appendix C, Item 26) Lithium grease (Appendix C, Item 36) Sealing compound (Appendix C, Item 63) Wear sleeve (Appendix A, Item 311.1) Manual References TM 9-2320-387-24P Equipment Condition • Wheel removed (TM 9-2320-387-24-1). • Brake protection guards removed (para. 7-11.1). General Safety Instructions Drycleaning solvent is flammable and will not be used near an open flame. Maintenance Level Unit