TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 160 of 680
TB 9-2320-335-13&P 5-10 5-17.2. SPEEDOMETER DRIVEN GEAR (ELECTRONIC) REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipmentL automotive (Appendix B, item 2) Materials/Parts O-ring (Appendix G, Item 219) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Sender generator (electronic) removed (para. 5-17.1). Maintenance Level Unit 1. Remove capscrew (2) and clamp (3) from pinion adapter (1) and transfer case (6). 2. Pull pinion adapter (1) out of transfer case (6). 3. Remove O-ring (4) from pinion adapter (1). Discard O-ring (4). 4. Remove driven gear (5) from transfer case (6). 1. Install O-ring (4) on pinion adapter (1). 2. Install driven gear (5) into pinion adapter (1). 3. Install and align pinion adapter (1) into transfer case (6) with clamp (3) and capscrew (2). Tighten capscrew (2) to 15 lb-ft (20 N•m). b. Installation a. Removal