TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 142 of 680
TB 9-2320-335-13&P 4-4 4-17.1. SPEEDOMETER/ODOMETER (ELECTRONIC) REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-2320-387-10 TM 9-2320-387-24-1 TB 9-2320-335-13&P, Appendix E Equipment Condition Battery cables disconnected (TM 9-2320-387-24-1). Maintenance Level Unit 1. Remove four capscrews (11), washers (10), and instrument cluster (1) from instrument panel (2). 2. Remove harness assembly nut (7) from rear of speedometer (13). 3. Remove two nuts (6), washers (5), washers (4), ground wire 58M (3), and shielding ground wire (8) from retaining bracket (9) on rear of speedometer (13). 4. Remove retaining bracket (9) from two threaded studs (12) on rear of speedometer (13) and remove speedometer (13) from instrument cluster (1). 1. Install retaining bracket (9) on two threaded studs (12) on rear of speedometer (13). 2. Install ground wire 58M (3) and shielding ground wire (8) on two threaded studs (12) on rear of speedometer (13) with two washers (4), washers (5), and nuts (6). Tighten nuts (6) to 5 lb-in (0.6 N•m). 3. Install harness assembly nut (7) on rear of speedometer (6). 4. Install instrument cluster (1) into instrument panel (2) with four capscrews (11) and washers (10). b. Installation a. Removal